(Conveyors based on the above design, click the picture for a closer look)

05-01-08: Conveyor Type FM, 83mm wide chain X 6,000mm long, Suspended drive unit with torque limiter and 240VAC 3ph motor fitted. Complete with side guide systems full length. Complete with stands to achieve 800mm height from floor to the top of the belt.Supplied as a set of pre-assembled modules for fast on site re-assembly = *£2390.00

05-01-08: Conveyor Type FM, 83mm wide chain but 4,000mm long, Suspended drive unit with torque limiter and 240VAC 3ph motor fitted. Complete with side guide systems full length. Complete with stands to achieve 800mm height from floor to the top of the belt.Supplied as a set of pre-assembled modules for fast on site re-assembly = *£2110.00

(Conveyors based on the above design, click the picture for a closer look)

The FlexMove Conveyor System is designed to provide flexible conveying solutions for all industries. This side-flexing link chain system employs a sideflexing plastic chain, allowing horizontal turns curves, bends, loops and handling elevation changes within a single continuous run. If you need a conveyor to loop, curve elevate or bend to your requirements, look no further. This multi-flexing system provides advantages in workspace layout, minimal component variation, design simplicity, enhanced productivity and ease of installation. This functional yet aesthetic design is clean, self-lubricating, low noise, low friction, low maintenance, corrosion-free and lightweight. The FlexMove range of standard and modular components is manufactured with the latest advancements found in more expensive systems such as, precision fabrications, acetal injection molding and metal forming methods. The end result is a collection of high quality components manufactured within precise manufacturing tolerances. Through the concept of standardisation and modular design, all FlexMove components can be easily connected and installed using only hand tools. This feature allows the system to be installed or reconfigured in less time than conventional conveyors and conveyor systems. With a wide range of layout capability and design simplicity features. You are always in control.   These systems have high weight capacity, can run at high speeds and minimise the need for multiple drives on large installations.	(Application with two curved infeeds merging into one line)   (Incline application, here the belt has been fitted with cleats)   (Application for boxes on a pharmaceutical production line with curves and accumulation)
Using your own creativity and the advantage of the miltiflex chains system in 3-dimensional movement your conveyor can bend, loop, incling, decline and curve smothly. Illustrations of FlexMove project  examples are shown here. FlexMove is designed as an ultimate solution for materials handling transportation systems in all manufacturing industries. The system provides a flexible platform for future expansion and updated layout capability. With in-depth knowledge and experience in materials handling systems coupled with an established worldwide sales and marketing network, FlexMove are confident in providing multiflexing conveyor solutions to your materials handling problems.	(Application with a vertical conveying module takes product between floors on a production line. The conveyor has a special version of the belt to hold the sides of the product.)
Conveyor Series FT Series: Chain Width: 35mm Tensile Strength @ 20°C: 4000N   Working Temperature °C: -20 to +60  Speed Range: 3-30M/min  Maximum Total Weight On Twin Lane Belt: 250kg (Can be used as single or twin lane design with bends.)     FS Series:  Chain Width: 63mm Tensile Strength @ 20°C: 4000N   Working Temperature °C: -20 to +60  Speed Range: 3-50M/min  Maximum Total Weight On Belt: 150kg   FM Series:  Chain Width: 83mm Tensile Strength @ 20°C: 6000N   Working Temperature °C: -20 to +60  Speed Range: 3-50M/min  Maximum Total Weight On Belt: 200kg    FC Series: Chain Width: 103mm Tensile Strength @ 20°C: 6000N   Working Temperature °C: -20 to +60  Speed Range: 3-50M/min  Maximum Total Weight On Belt: 300kg        FL Series:  Chain Width: 150mm Tensile Strength @ 20°C: 6000N   Working Temperature °C: -20 to +60  Speed Range: 3-50M/min  Maximum Total Weight On Belt: 300kg
Belt Types Standard belt for accumulation and steady travel straight, curve and loop as well as incline.   Belt with fixed on cleats, available in different widths.     Belt with rubber grip pads for high friction applications.     Belt with roller attachments spaced out for larger products.	Most of the series have all of the belt options shown: Call for details. Static dissipative belt for electronics industry.   Belt with soft finger pads for side grip of products when marking from underneath or elevating or inverting.   Belt with roller attachments for zero back pressure or high level of accumulation applications.   Belt with steel inserts for high temperature or sharp edged products transport. Also has low friction.
Drive Types Direct drive without motor.  Intermediate catenary drive without motor.  Intermediate direct drive with motor. Wheel drive with motor. Small radius.	Most of the series have all of the drive options shown: Call for details. Direct drive with motor.  Suspended drive with motor. Intermediate suspended drive with motor.   Intermediate catenary drive with motor.
Track & Accessory Options Straight running profile without wearstrips.  Sliding curve 90°  Rolling curve 90°  Decline / Incline track module slight angle. Tail idler end standard.   Side rail arrangement adjustable.   Side rail arrangement adjustable.	Sliding curve acute angle.   Rolling curve acute angle.  Rolling curve 180°  Decline / Incline track module steep angle.  Tail idler bend vertical. Side rail arrangement adjustable. Side rail arrangement adjustable.
Belt with rubber finger attachments used to invert and elevate a  product for marking or labelling.	Standard belt used to accumulate a large amount of light product in the paper industry.
A selection of parts as delivered for a conveyor rolling bend.	Pneumatic stopping device for holding pallets while operation is carried out on the product on the pallet.
Example of twin lane curves - loops (For pallet transport) bend standard on  FT series of conveyors. Possible on other series.	Stainless steel option for clean rooms, food and pharmaceutical applications.
Industrial application for machined parts accumulation.	Example of side holding belt used to elevate a product to another level in a machine.